This is the second instalment of a new blog series, where I try out sharpening mechanisms. I’m not yet fully sure about the format – I will write about things that matter to me, such as build quality, capability to sharpen, but also very subjective things like how it feels to sharpen with this. If I was you, I would expect this to be a rare blog segment. The reviews will be independent from the manufacturer, without control over what I test or write. I am not paid nor do I receive anything from the manufacturer if you decide to buy one.

If you make a sharpening device and you want me to test it, feel free to reach out.

KMFS Sensei

Today’s sharpening mechanism is made by the Czech Company KMFS. In the last review, we had their 1×6″ mechanism – this time it’s the device meant to aid you with benchstones!

At the time of this review, the mechanism retails for about 500 Euro. The device was a loaner unit given to me by the manufacturer, but they had no control over this review and didn’t see it before it was uploaded publicly.

The KMFS Sensei, assembled with the infinity angle adjuster.

The device gets delivered in a custom foam cutout, very sturdy yet compact case:

It assembles in just seconds – pretty much the only thing you have to do is put in one single screw to secure the base to the vertical stand. The case has enough space so one could fit some sharpening stones in there – making it a very mobile setup.

Build Quality

Let’s take a look around it:

The device is clearly a vantaedge – silver metal parts, milled finishes, a combination of steel and aluminium. It is quite compact – barely longer than the 200 mm benchstone. The guiderails are from steel, the bearings are easy to move and the whole device has a heavy, solid feel to it. Because the lever from the swinging guiderail gets quite large, there are some detacheable little feet (visible close to the vertical rod at the back), that just “clip” in. Overall, the whole device is very quickly assembled.

I think it’s a good look for the device, very fitting. A black edition would be superb though, especially together with the brass nut!

KMFS is a European company located in the Czech Republic and manufactures, as far as I know, the parts themselves. This is something I can highly appreciate – kudos, KMFS!

The Sensei came out relatively recently, and you can see that the manufacturer is trying to keep not only a style, but also some shared parts. The loaner unit I have comes with the new “infinity” adjustable angle mechanism:

Detail photos of the infinity adjustable mechanism.

The infinity adjuster is pretty cool: A thumbscrew drives a little gear that changes the angle. There is a rough indicator in the back, but the exact angle is set best via a small, digital angle cube. The knife is held very securely by two strong magnets that have a rubber cover. Everything is screwed together and should be user replaceable – for example, if worn out. Moreover, this allows for upgrading the device – my understand is, it typically comes with a couple of pre-set angles, and the infinity adjustable mechanism is an addon. I would imagine the manufacturer will come out with more possible addons, maybe a clamp, in the future, so it’s nice that it’s not pressed/glued together.

The mechanism itself is self-locking – which is pretty neat in itself, as it does not require to tighten something. Nevertheless, there is a slight amount of play/backlash in the whole gear system, which you can make out near the end of the video. I think this is acceptable – after all, gravity preloads the system!

The device as something really cool in the base – basically, the whole base is the sharpening stone clamping utility. This makes it very solid, and the manufacturer has included some nice touches. For example, there is a black, plastic (I’d guess POM!) support that slides along the rails. The two jaws that clamp are milled from durable steel, and feature a small dovetail – this is super clever, as it then easily accepts smaller 1×6″ sharpening stones.

Clamping mechanism of the KMFS Sensei – milled from stainless steel, with a dovetail that accepts the popular 1×6″ stones.

Why do I love this so much? You see, I have a super large collection of 1×6″ stones. And I’d say that probably, for experimenting, there are more different, curious, novel 1×6″ stones out there than benchstones. The typical rubber benchstone holders don’t accept those – but the Sensei does!

Sharpening action with a smaller 1×6″ stone on the device.

Sharpening Process

Sharpening on the KMFS Sensei is very nice. Because of the low moving mass (the guiderails just swivel around their pivot, so the moving mass is pretty much the knife & vertical rod / sled), there is not a lot of resistance.

Swapping sides requires to overcome the magnetic force – this is something that’s very easy on a larger knife, as one has a larger lever, and a bit tricky on the small Kasé Shard I am using here to demonstrate it. The motion is very smooth and without noticeable friction.

For the overall geometry/working principle of this type of sharpeners, I would like to refer you to the previous two parts of this series – there, I explained it in detail! Basically: you are constraining the blade via the locked angle, so that you get a repeatable process. Because the vertical rod has the whole mechanism floating, you don’t have to compensate for stone height. This is especially nice at later, finer grit progressions.

Just like I stated in the Katocut Nowi Pro review: The motion used here is what I think sharpening is meant to be – it just feels natural. But, and it’s a big but: here, the mechanism supports you just enough that missing wrist control or wobble doesn’t ruin your result. Instead, you get, with decent abrasives, blistering sharp edges! If you haven’t tried such a sharpener before – I can only advise you to do that.

The only issue I had while using it is – it feels just slightly too small. You can see me in the video bumping a couple of times into the back of the support – well, I guess I could maybe flip the sled around to get closer? But then I’d probably bump the infinity adjuster into it. On very large knifes, I found that I need to also change the magnet position horizontally, to reach the tip. This could probably be solved by just sourcing slightly longer guide rails yourself – but my one suggestion to the manufacturer would be to make it a bit bigger. Give it some more room to accommodate larger knives.

Conclusion

I mean – from the positive review, you can already see that I am very much a fan from this type of sharpener. Some very positive things stand out here: The device is manufactured by a small, hard working company. The materials are high end, everything is CNC machined and carefully dimensioned. It is super portable, fun to use and gives you fantastic edges. It’s quick to assemble, relatively sturdy and should be very durable.

I think this is pretty much flawlessly executed – good craftsmanship, working principle, fair price, locally made. If only it was 50 mm larger!

Nevertheless, the conclusion to this can only be: get one! I will for sure.